Sale!

Wood Pebble Table Lamp-Fast Shipping

Original price was: $285.00.Current price is: $71.25.

SKU: 9608060338417 Category:

Description

This wooden pebble-stack table lamp pairs three solid-wood forms — a teardrop base, a flat disc, and a small sphere — with a pleated linen umbrella shade. Pick the small size for a nightstand or the large for a console or desk in a room of 54–86 sq ft. The integrated LED has three lighting modes you cycle through with a button on the cord.

Size — choose oneSmall ∅ 9.8″ shade x H 11.4″ (25 x 29 cm) Large ∅ 12.6″ shade x H 14.2″ (32 x 36 cm)
Features

Stacked wood forms

Teardrop base, flat disc, and small sphere in solid wood, stacked into a pebble-cairn silhouette.

Pleated linen shade

Soft umbrella-shape linen shade diffuses light into a wide, warm pool over the surface.

3-mode button switch

Press the in-line button on the cord to cycle through three lighting modes for different moods.

Lighting

Integrated LED, no bulb to install

An LED is built into the fixture, so there is no separate bulb to buy or replace. Press the in-line cord button to cycle through three lighting modes; the last mode is remembered the next time you switch on.

Finish

Natural wood & linen, as shown

Ships in the natural wood and oatmeal linen finish pictured. Each wood form is solid timber, so grain pattern and tone vary slightly piece to piece. For project quantities, email us before ordering.

Shape Diagrams

Official dimension sheet for each size. Click any diagram to enlarge.

Click any diagram to view full size ↗

Specifications

Dimensions Small: ∅ 9.8″ shade x H 11.4″ (25 x 29 cm)
Large: ∅ 12.6″ shade x H 14.2″ (32 x 36 cm)
Base diameter Small: ∅ 3.5″ (9 cm) · Large: ∅ 5.1″ (13 cm)
Material Solid Wood, Linen
Color Natural wood, oatmeal linen
Light source Integrated LED · 3 lighting modes · button-cycled
Voltage 120V (AC 110–240V global)
Coverage 54–86 sq ft (5–8 m²)
Switch In-line cord button switch
Cord Approx. 6 ft plug-in cord
Mount Free-standing, indoor dry locations
Certification Listed · North America · CE · SAA · SASO · KC

Setup Notes

  • Place on a flat, stable surface; the wood base is solid and gives the lamp a low center of gravity.
  • Plug into a standard outlet — no hardwiring or bulb installation needed.
  • Press the in-line button to switch on; press again to cycle through the three lighting modes.
  • Indoor dry locations only — not rated for bathrooms, porches, or outdoor use.
  • Wipe the wood with a dry, soft cloth; avoid soaking or wet-wiping the linen shade.
  • Keep liquids away from the wood; solid timber can stain or warp if water sits on the surface.

Downloads & ResourcesSpec Sheet (PDF) Request 3D Files
FAQWhich size should I pick?

Small (∅ 9.8″ shade x H 11.4″) suits a nightstand or compact bedside table. Large (∅ 12.6″ shade x H 14.2″) suits a console, desk, or wider sideboard. Both share the same wood-pebble base and pleated linen shade design.

How does the lighting work?

The LED is built into the fixture, so there is no separate bulb. Press the in-line button on the cord to turn the lamp on; each additional press cycles through three lighting modes. The lamp remembers the last mode the next time you switch on.

Is it dimmable?

The button cycles between fixed lighting modes rather than a continuous dimmer. We don’t recommend pairing it with a wall dimmer, since the built-in driver is not designed for external dimming.

What does the wood look like?

Each lamp uses solid wood for the three stacked forms, so grain pattern and tone vary slightly piece to piece. The photo is representative rather than an exact match.

What is the warranty?

The lamp carries a 2-year warranty against manufacturing defects. Email support with your order number if anything arrives damaged or fails in normal use.

Reviews

There are no reviews yet.

Be the first to review “Wood Pebble Table Lamp-Fast Shipping”

Your email address will not be published. Required fields are marked *