Travertine Double-Gourd Table Lamp-Fast Shipping

Description

A sculptural table lamp built from a solid travertine double-gourd body topped with a wide cream linen coolie shade. The stone is natural — pitted, lightly veined, warm beige — and reads as quietly handsome stoneware against any wall. Compact at ∅ 11.8″ × H 12.6″ (∅ 30 × H 32 cm), with a single E27 socket and an in-line cord switch. Sized for a bedside, console, sideboard, or living-room side table.

Features

Travertine double-gourd

A solid travertine body in a soft hourglass silhouette — natural stone with characteristic pits and veining.

Wide linen shade

A cream linen coolie shade sits wider than the body and diffuses an even, warm glow downward.

E27 + cord switch

Standard E27 socket on a plug-in cord with an in-line on/off switch — no installation needed.

Natural stone

Each piece of travertine is one of a kind

Travertine is a natural sedimentary stone with characteristic pitting (small voids) and soft veining. The pattern, depth of pits, and exact warm-beige tone vary from piece to piece — every lamp shares the same silhouette and material family, but no two are identical. These are signatures of the stone, not defects. The photo is representative; the lamp you receive will sit in the same family but show its own pattern.

Care

Never use water, soap, or liquid cleaners

Travertine is porous and absorbs moisture, which can leave permanent staining, darken sections, or settle into the natural pits and discolor them. Dust the body regularly with a soft, dry brush (a clean paintbrush works well) or a dry microfiber cloth. For the linen shade, a soft lint roller lifts dust and pet hair without damaging the weave. Email us if a stain develops in normal use.

Bulb

E27 bulb sold separately

The socket takes one standard E27 (Edison screw) bulb up to 40W — LED or Edison filament both work. The bulb is not included so you can match your color tone; warm-white at 2700–3000K, around 600–800 lumens, pairs best with the cream linen shade and warm stone.

Finish

Natural travertine body, warm-metal accents

A single tone shown — natural beige-cream travertine paired with a cream linen shade and warm-metal (brass-toned) accents at the finial and base ring. For project quantities or a custom shade fabric, email us before ordering.

Shape Diagram

Official dimension sheet. Click to enlarge.

Click to view full size ↗

Specifications

Setup Notes

• Place on a flat, stable surface — solid travertine is heavy, so confirm the surface is rated for stone furniture weight (think: a small stoneware vase).
• Lift by the body, not by the shade — the shade is fabric over a wire frame and not load-bearing.
• Install one E27 bulb up to 40W, warm-white 2700–3000K LED recommended. Do not exceed the rated wattage.
• Plug into a standard outlet and use the in-line cord switch on the cable to turn on and off.
• Indoor dry locations only — not rated for bathrooms, covered porches, or outdoor use.
• Dust the travertine body with a soft, dry brush; dust the linen shade with a lint roller. Avoid water and liquid cleaners on the stone — see Care above.

Downloads & ResourcesSpec Sheet (PDF) Request 3D Files
FAQWill the travertine look exactly like the photos?

No — and that’s the nature of the material. Travertine is a natural sedimentary stone, and the depth of pitting, the vein pattern, and the exact warm-beige tone shift from piece to piece. Every lamp shares the same double-gourd silhouette and falls in the same color family, but no two are identical. If a perfectly uniform look matters, this stone may not be the right fit — email us with any questions before ordering.

What bulb does it use and is it included?

One standard E27 (Edison screw) bulb up to 40W. The bulb is not included. We recommend a warm-white LED at 2700–3000K, around 600–800 lumens, to match the warm tone of the stone and shade. A clear-glass Edison filament also looks at home with the linen shade.

How do I clean the lamp?

Never use water, soap, or liquid cleaners on the travertine. The stone is porous and absorbs moisture, which can leave permanent staining and discolor the natural pits. Dust the body regularly with a soft, dry brush — a clean paintbrush works well — or a dry microfiber cloth. For the linen shade, a soft lint roller lifts dust and pet hair without damaging the weave. Wipe the metal accents with a dry microfiber.

How heavy is it, and where can I place it?

Solid travertine is heavy — expect the lamp to be on the substantial side for its size, similar in weight to a small stoneware vase. Place it on a flat, stable surface (bedside, console, sideboard, side table, study desk) that’s rated for stone furniture weight. Avoid floating shelves with low load ratings, and lift by the body rather than the shade. For project orders, request the exact weight before specifying installation.

What is the warranty?

The lamp carries a 2-year warranty against manufacturing defects in the wiring, socket, and switch. Email support with your order number if anything arrives damaged or fails in normal use. Natural stone variation (pits, veining, color shifts) is part of the material and not covered as a defect.