Mohegan Alabaster Pendant Lamp-Fast Shipping

Description

Hand-Carved Alabaster · Brass Frame · Modern Pendant

A modern pendant in a contemporary neoclassical vocabulary — two angular white-alabaster panels suspended within an open polished-brass frame, drawing the silhouette of a small classical lantern resolved in flat planes. The integrated LED engine concealed within the frame backlights the alabaster from above, lighting the natural veining from within so the stone reads luminous against the room.

Hand-carved alabaster panels and a hand-finished brass frame; veining, translucency, and tone vary panel to panel. Suited to kitchen islands, breakfast nooks, dining tables, primary entry foyers, and great-room reading corners in 5,000+ sq ft estates and luxury hotels — for design-led clients drawn to the modern alabaster pendant vocabulary in transitional and neoclassical interiors.

Why This Fixture

Hand-Carved Solid Alabaster

Two angular alabaster panels cut from solid blocks. Veining and translucency vary piece to piece — every fixture is one of one.

Polished Brass Frame

Hand-finished iron frame in polished brass — angular, open, drawn in clean planes rather than period scrollwork.

Integrated LED Backlight

Concealed LED engine within the frame backlights the alabaster from above, lighting the natural veining from within.

Finish & Light

Polished Brass & White Alabaster · Warm or Cool Light

Single standard finish with two LED color-temperature options at checkout — warm white (2700K) for residential dining and reading; cool white (4000K) for kitchen and gallery interiors. Veining differs significantly between fixtures.

Hand-carved alabaster — every piece is unique. Veining, translucency, and tone vary panel to panel; your fixture will not match the photos at the stone level.

Default LED is non-dimming. Standard wall dimmers will not work — TRIAC-dimmable wiring is available as a custom build; contact us before ordering.

Product Notes

Ø 14″ × H 24.5″ImperialØ 35.5 × H 62 cmMetric

Installation

• Licensed electrician required. Hardwired ceiling pendant via supplied canopy plate and modular suspension rod.
• Specialist installer recommended. Alabaster is a soft mineral — handle the panels with care during un-crating; lift only by the brass frame.
• Hang the lower edge 30–34″ above the kitchen island or dining table, or 7 ft+ above the floor in walking zones. Adjust the modular rod (12″ + 12″) on site to suit the ceiling.
• Specify color temperature at order. 2700K warm or 4000K cool — chosen at checkout, not field-changeable.
• Freight delivery. Alabaster panels individually wrapped — un-crate slowly with two people.

Downloads

Download SpecificationsInstallation Guide

Frequently Asked

What size kitchen island or dining table does it suit? +

The Ø 14″ pendant suits kitchen islands and dining tables 36–60″ long when used as a single pendant, or 60–96″ when installed in a row of 2–3. For islands and tables wider than 60″, plan for multiples spaced 24–30″ apart center-to-center. Hang the lower edge 30–34″ above the island or table top, measured from the finished surface.

Warm or cool light — which should I choose? +

Choose 2700K warm white for residential dining rooms, breakfast nooks, foyers, and reading corners — it reads as candle light through the alabaster and warms the natural cream-and-amber veining. Choose 4000K cool white for kitchen islands, gallery interiors, and modern white-and-stone rooms — it reads as daylight and emphasizes the cool side of the alabaster veining. Color temperature is selected at checkout and is not field-changeable, so confirm before ordering.

Will my fixture match the photographs? +

The brass frame and silhouette are made to consistent specification — your fixture will read identically in form. The alabaster, however, is hand-carved from natural blocks: veining patterns, translucency, exact tone, and minor mineral inclusions differ between panels. The fixture you receive will sit within the same visual language as the photographs but will be visibly distinct at the veining level.

Is it dimmable? Lutron-compatible? +

The default integrated LED is non-dimming and will not work with standard TRIAC wall dimmers. TRIAC-dimmable wiring is available as a custom build — please specify when contacting us before ordering. The dimmable variant is compatible with Lutron Caséta, Diva, and forward-phase wall dimmers. See our dimming protocols guide.

How do I clean the alabaster? +

Dust with a soft dry microfiber cloth only. Do not use water, glass cleaner, ammonia, vinegar, or any liquid cleaner — alabaster is porous and water will discolor or stain the surface. For fingerprints, use a dry chamois or soft cotton cloth. Keep the fixture away from high-humidity rooms (steam-shower baths, immediately above stovetops) to preserve the stone over time.

Suitable for hospitality and trade projects? +

Yes — hospitality-grade. Hand-carved alabaster and integrated sealed LED suit luxury hotel suites and presidential suites, restaurant private dining and bar areas, members-club lounges, and contemporary or neoclassical residential projects. Contact our trade desk for matched alabaster tone within batches and project-quantity coordination.