Long Spiral Crystal Chandelier-Fast Shipping

Description

Spiral Ribbon · Crystal Beads · Gold Finish

Long Spiral Crystal Chandelier

A continuous spiral of gold-finished stainless steel ribbon — embedded along its length with crystal beads catching the light at every twist — drops vertically from a small canopy on multiple thin support cables. The ribbon coils, loops, and unfurls down the full length of the fixture, ending in a tapered tail. Available in four sizes from 7.5 to nearly 10 feet tall, the Spiral is built for double-height stairwells, two-story foyers, and atrium spaces where the fixture is meant to be viewed from multiple floors.

Plan the vertical space carefully

Even the smallest size is over 7.5 feet tall — the largest reaches nearly 10 feet. Confirm ceiling height, the floor-to-bottom-tip clearance, and whether the fixture will be viewed from a single floor or across multiple floors of a stairwell. Allow a minimum 2 feet between the lowest point and any floor, walkway, or banister below.

Hardwired — licensed electrician required

Connects to a standard ceiling junction box. Standard cable drop is 59″ and can be lengthened on request — particularly recommended for very tall stairwells and atriums.

Features

Spiral Ribbon Form

Continuous twisted metal band.

Crystal Embedded

Catches light at every coil.

Vertical Statement

Built for double-height spaces.

SizesTap to enlargeFour Sizes

Colour Temperature

Select at time of order. Integrated LED is fixed at manufacture.

3000K Default

Warm white — closest to candlelight, brings out the warm gold finish.

4000K

Neutral white — sharper definition for the crystal facets.

6000K

Cool daylight — crisp commercial light for hospitality.

Specifications

DownloadsSpec Sheet
Frequently Asked QuestionsWhich size do I need for my space?

Match the fixture height to your usable ceiling height. The 90.1″ size suits 11–13 ft single-story foyers; the 98.4″ size suits two-story foyers with 12–14 ft ceilings; the 110″ size suits double-height stairwells with 14–16 ft ceilings; and the 118″ size is built for atriums and grand staircases with ceilings 16 ft or higher. Always allow a minimum 2 feet of clearance between the bottom tip and any floor, walkway, or banister below.

How is it installed in a staircase?

The Spiral hangs from a small ceiling canopy via multiple thin support cables, with all wiring routed through the canopy. The fixture should be installed plumb (vertical) over the open space of the stairwell so it reads from multiple floors. A licensed electrician with experience installing tall fixtures and access to a tall ladder or scaffolding is required — typically a two-person installation.

Can the fixture be hung at an angle?

The Spiral is designed to hang vertically — the spiral form reads correctly only when straight down. It is not built to be tilted. If your stairwell is offset or curved and the fixture would not hang clear of the railing, contact us before ordering to discuss size selection or alternative configurations.

Is it dimmable?

Yes — when paired with a compatible Triac or trailing-edge dimmer (sold separately). Dimming softens the warm gold finish and is recommended for evening installations in foyers and stairwells.

Is the Spiral certified for North America?

Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.